$15
mouse accessory
SKU DC-AC-PGD
Prism Glass Dots
Dot skatesAny mouse0.6 mm
Universal glass dots. Glass glide for any mouse.
$24In stock
In the box
2 items
- 8 glass dots
- Alcohol prep pad
Fits any mouse
Universal: ours or any other mouse.
Arrives in 4–8 business days
US estimate: ships in 1–2 business days, then 3–6 in transit.
We ship to 25 countries — rates at checkout$75 more for free US shipping$99
Prism Glass Dots
Standard
0-01Prism Glass Dots
Overview
Eight 8.5 mm dots of chemically tempered glass bring the glide of glass skates to any mouse — enough for two mice at four dots each. Like our glass skates they never wear in, and the rim is polished round so it rides over seams and the edge of the pad.
Glass doesn’t bend, so each dot needs a flat spot at least as wide as itself; if one sits in a recess, check that the mouse stands on the dots and not on the shell. The adhesive holds firmly and peels off cleanly when you change your setup.
- 8 tempered glass dots, 8.5 mm
- Glass glide on any mouse
- Enough for two mice
- Polished, rounded rim
0-02Prism Glass Dots
Fits any mouse
Universal: it works with any mouse — ours or any other.
Fits
Any other mouse
Universal — other brands too.
0-03Prism Glass Dots
Placing dot skates(4)
About 5 minutes, start to finish.
Clear the base
Dots replace full skates rather than sitting next to them: at different heights the mouse would rock. Lift the old skates and clean off their adhesive, as in a skate swap.
Plan the layout
Use at least four dots, one near each corner and as far apart as the base allows, so the mouse can’t tip. On a heavy mouse or a soft pad, add one or two more. Keep every dot clear of the sensor window.
Clean the spots
Wipe each spot with the alcohol prep pad and let it dry for a minute.
Place and press
Lift each dot by its edge with tweezers and set it straight down — don’t slide it into place. Press it for 10 seconds, then check that the mouse sits level and glides straight.
TipSizes mix freely, since every dot on a sheet has the same thickness: larger dots at the front and back, smaller ones where the base narrows.
0-04Prism Glass Dots
Specs(7)
Covered by a 12-month warranty.
- Type
- Dot skates
- Material
- Chemically tempered glass
- Thickness
- 0.6 mm
- Dots
- 8 on one card
- Diameter
- 8.5 mm
- Best on
- Cloth and hybrid pads
- Not for
- Glass pads
In the box(2)
- 8 glass dots
- Alcohol prep pad
0-05Prism Glass Dots
Compare(5)
Every way we sell to make a mouse glide, side by side — each in its version for your mouse.
- SkatesArc PTFE Skates
- Material
- 100% virgin PTFE
- Thickness
- 0.8 mm
- Fits
- Cut per mouse
- SkatesArc Pro Skates
- Material
- 100% virgin PTFE
- Thickness
- 1 mm
- Fits
- Cut per mouse
- SkatesPrism Glass Skates
- Material
- Chemically tempered glass
- Thickness
- 0.6 mm
- Fits
- Cut per mouse
- Dot skatesArc Dot Skates
- Material
- 100% virgin PTFE
- Thickness
- 0.8 mm
- Fits
- Any mouse
$15 - Dot skates · this pagePrism Glass Dots
- Material
- Chemically tempered glass
- Thickness
- 0.6 mm
- Fits
- Any mouse
$24
0-06Prism Glass Dots
Questions(9)
Still unsure? Write to [email protected] — we reply within one business day.
Yes — it works with any mouse, ours or another brand’s.
one of each kind
Complete the upgrade(4)
The rest of the kit, one of each kind. Choose your mouse to see the versions made for it.
your mouse
Vektor AirOrbit ProPulse Mini
$19
More gear(4)
BestsellerEmber$89In stock · ships in 1–2 business days
Onyx$109In stock · ships in 1–2 business days
NewInk$49In stock · ships in 1–2 business days
Bestseller