$15
mouse accessory
SKU DC-AC-ADS
Arc Dot Skates
Dot skatesAny mouse0.8 mm
Universal PTFE dots. Tune any mouse.
$15In stock
In the box
2 items
- 40 PTFE dots on one sheet
- Alcohol prep pad
Fits any mouse
Universal: ours or any other mouse.
Arrives in 4–8 business days
US estimate: ships in 1–2 business days, then 3–6 in transit.
We ship to 25 countries — rates at checkout$84 more for free US shipping$99
Arc Dot Skates
Standard
0-01Arc Dot Skates
Overview
Forty round dots of 0.8 mm virgin PTFE in three sizes, for any mouse — or for tuning your own. Dots touch the pad with less surface than full skates, so the mouse breaks into motion more easily and the glide feels lighter, and you decide exactly where they sit.
Four near the corners of the base make a stable mouse; five or six spread the load on a heavy mouse or a soft pad. Every dot on the sheet has the same thickness, so sizes mix freely — larger ones at the front and back, smaller ones where the base narrows — and one sheet is enough to set up several mice or try a few layouts.
- 40 dots in 3 sizes
- Any mouse, your layout
- Less contact, easier start
- 0.8 mm virgin PTFE
0-02Arc Dot Skates
Fits any mouse
Universal: it works with any mouse — ours or any other.
Fits
Any other mouse
Universal — other brands too.
0-03Arc Dot Skates
Placing dot skates(4)
About 5 minutes, start to finish.
Clear the base
Dots replace full skates rather than sitting next to them: at different heights the mouse would rock. Lift the old skates and clean off their adhesive, as in a skate swap.
Plan the layout
Use at least four dots, one near each corner and as far apart as the base allows, so the mouse can’t tip. On a heavy mouse or a soft pad, add one or two more. Keep every dot clear of the sensor window.
Clean the spots
Wipe each spot with the alcohol prep pad and let it dry for a minute.
Place and press
Lift each dot by its edge with tweezers and set it straight down — don’t slide it into place. Press it for 10 seconds, then check that the mouse sits level and glides straight.
TipSizes mix freely, since every dot on a sheet has the same thickness: larger dots at the front and back, smaller ones where the base narrows.
0-04Arc Dot Skates
Specs(7)
Covered by a 12-month warranty.
- Type
- Dot skates
- Material
- 100% virgin PTFE
- Thickness
- 0.8 mm
- Dots
- 40 on one sheet
- Diameters
- 16 at 7 mm · 16 at 8 mm · 8 at 9.5 mm
- Edges
- Rounded, polished
- Adhesive
- 3M, pre-applied
In the box(2)
- 40 PTFE dots on one sheet
- Alcohol prep pad
0-05Arc Dot Skates
Compare(5)
Every way we sell to make a mouse glide, side by side — each in its version for your mouse.
- SkatesArc PTFE Skates
- Material
- 100% virgin PTFE
- Thickness
- 0.8 mm
- Fits
- Cut per mouse
- SkatesArc Pro Skates
- Material
- 100% virgin PTFE
- Thickness
- 1 mm
- Fits
- Cut per mouse
- SkatesPrism Glass Skates
- Material
- Chemically tempered glass
- Thickness
- 0.6 mm
- Fits
- Cut per mouse
- Dot skates · this pageArc Dot Skates
- Material
- 100% virgin PTFE
- Thickness
- 0.8 mm
- Fits
- Any mouse
$15 - Dot skatesPrism Glass Dots
- Material
- Chemically tempered glass
- Thickness
- 0.6 mm
- Fits
- Any mouse
$24
0-06Arc Dot Skates
Questions(8)
Still unsure? Write to [email protected] — we reply within one business day.
Yes — it works with any mouse, ours or another brand’s.
one of each kind
Complete the upgrade(4)
The rest of the kit, one of each kind. Choose your mouse to see the versions made for it.
your mouse
Vektor AirOrbit ProPulse Mini
$19
More gear(4)
BestsellerEmber$89In stock · ships in 1–2 business days
Onyx$109In stock · ships in 1–2 business days
NewInk$49In stock · ships in 1–2 business days
Bestseller