$15
mouse accessory
SKU DC-AC-IBS-VEK
Ink Blossom Skin
SkinCut per mouse0.15 mm
Pre-cut vinyl skin. White blossom on black.
$19In stock
Fits: Vektor Air
3 mice
Arrives in 4–8 business days
US estimate: ships in 1–2 business days, then 3–6 in transit.
We ship to 25 countries — rates at checkout$80 more for free US shipping$99
Ink Blossom Skin
Vektor Air
0-01Ink Blossom Skin
Overview
Our Ink Blossom artwork — white brush-stroke cherry blossom on black, with a single red sun — as a pre-cut skin for your mouse. It is the same artwork as the example build of our Atelier deskmat, so mouse and mat can match.
Thin cast vinyl under a matte, scratch-resistant laminate keeps the black deep and the print protected where your fingers rest. The air-release adhesive smooths down without bubbles, the main-button pieces stop at the split so clicks don’t change, and it peels off cleanly whenever you want a change.
- Ink Blossom artwork, as on our deskmat
- Matte, scratch-resistant laminate
- Air-release adhesive, no bubbles
- Clicks feel unchanged
0-02Ink Blossom Skin
Compatibility(3)
Cut for Vektor Air, Orbit Pro and Pulse Mini. Each set follows the shell of one mouse, so a set for one does not fit another.
No set
Any other mouse
Sets are cut for our shells only.
0-03Ink Blossom Skin
Applying a skin(5)
About 15 minutes, start to finish.
Clean the shell
Wipe the top shell and both main buttons with the alcohol prep pad and let them dry. Any dust left under the vinyl shows as a bump.
Find the anchor edge
Hold each piece against the shell with the backing on. The edge along the scroll-wheel slot is your anchor: it is cut to line up with it.
Lay it down from the anchor
Peel back part of the backing, set the anchor edge and work outwards with the squeegee card, a little at a time. The air-release channels let bubbles out under the card, so there is no need to lift the vinyl.
Warm it round the curves
Where the shell curves, warm the vinyl for a few seconds on a low setting and press it into shape with your thumb. Don’t stretch it cold — stretched vinyl pulls back and lifts.
Seal and check
Warm the edges once more and press them down. Check that the split between the main buttons is clear, so each button clicks on its own.
TipGive the adhesive a day to bond before heavy use.
0-04Ink Blossom Skin
Specs(6)
Covered by a 12-month warranty.
- Type
- Skin
- Material
- Cast vinyl with matte laminate
- Thickness
- 0.15 mm
- Coverage
- Top shell and both main buttons
- Finish
- Matte laminate
- Adhesive
- Air-release, removable
In the box(3)
- Pre-cut skin for the chosen mouse
- Alcohol prep pad
- Squeegee card
0-05Ink Blossom Skin
Compare(2)
Every way we sell to restyle a mouse, side by side — each in its version for your mouse.
- SkinEmber Split Skin
- Material
- Cast vinyl with matte laminate
- Thickness
- 0.15 mm
- Fits
- Cut per mouse
$19 - Skin · this pageInk Blossom Skin
- Material
- Cast vinyl with matte laminate
- Thickness
- 0.15 mm
- Fits
- Cut per mouse
$19
0-06Ink Blossom Skin
Questions(6)
Still unsure? Write to [email protected] — we reply within one business day.
Choose yours under “Fits”: Vektor Air, Orbit Pro or Pulse Mini. Each set is cut for that one shell, so a set for one mouse won’t fit another — or another brand’s mouse.
for Vektor Air
Complete the upgrade(4)
The rest of the kit for Vektor Air: one of each kind, each in its version for that mouse.
your mouse
Vektor AirOrbit ProPulse Mini
$15
$15
$19
More gear(4)
Onyx$109In stock · ships in 1–2 business days
NewInk$49In stock · ships in 1–2 business days
Bestseller
Obsidian$79In stock · ships in 1–2 business days